RPC-SP4D, which is a remote power controller, can control and monitor remotely an electric power into the connected less than 4 electric devices respectively which have less than 10 ampere current capacity such as a few CCTVs, lighting systems, electric sign, and entrance control systems. It is appropriate for the small & medium sized remote control network. The SP4D provides two separate input powers, each with two group outputs. (Total of four output power)
RPC-SP4D power input
Input power 110~220VAC / 15A x 2group
Output switching power 110~220VAC / 10A/CH
(15A : total current of 2CH) x 2group
Number of switching outlet AC Power - 4CH
DC booting power - 2CH
CPU ARM 32bit Cortex-M3 Core 96 MHz
Flash Memory : 2x128 Kbytes
SRAM : 52 Kbytes
I/O Port DC Control : T/B x 2ea
Power consumption 6W
Network interface WAN (RJ-45)
Display panel 8 LEDs
: Status - Power, CPU, AC outlet(x4ea), DC link(x2ea)
Operating Temp.&Humi Temp. : -20 ~ +50 ℃
Humi. : 10 ~ 90 %
Size Based on outer case
400 x 98 x 75mm (WxDxH)
RPC-SP4D front image

* Dual power input
- Two power inputs, Two power groups, 4 power outputs

* Real time monitoring
- Status of AC outlet switch, current, electric power, booting power, and temperature.

* Control an each AC outlet switch
- Control AC outlet and DC booting power switch to be on and off

* Auto-repower AC outlet up
- time set for the auto-repower AC outlet

* Electric safety circuit
- Warning message and switch off automatically over 12A current for AC outlet

* Additional function
- integrated temperature sensor

* No additional management web server
- cost saving for installation &management

* No additional network device in case of Static IP and intra network

* DHCP : with using the DDNS function of router

RPC-SP4D control web page

:: RPC-SP4D WebUI ::