The RPC-SP8, which is a remote power controller installed on the standardized network or server rack, can control and monitor remotely an electric power into the connected less than 8 electric devices respectively such as CCTVs, lighting systems, entrance control systems, and network management systems.
RPC-SP8 side image
Input power 110~220VAC / 30A
Output switching power 110~220VAC / 10A/CH
(30A : total current of 8CH)
Number of switching outlet AC Power - 8CH
DC booting power - 3CH
CPU ARM 32bit Cortex-M3 Core 96 MHz
Flash Memory : 2x128 Kbytes
SRAM : 52 Kbytes
I/O Port RS-232 : DB9 x 1ea
DC Control : T/B x 3ea
Power consumption 6W
Network interface WAN, LAN (RJ-45 x 2ea)
Display panel 7-Segment
: AC current per each outlet
13 LEDs
: Status - Power, CPU, AC outlet(x8ea), DC link(x3ea)
Operating Temp.&Humi Temp. : -20 ~ +50 ℃
Humi. : 10 ~ 90 %
Size Based on outer case (Except handle, bracket)
440 x 151 x 44mm (WxDxH)
RPC-SP8 rear image
RPC-SP8 front image

* 19-inch standard rack mount
- It is mounted in a 19-inch standard rack at 1U height.

* Real time monitoring
- Status of AC outlet switch, current, electric power, booting power, and temperature.

* Control an each AC outlet switch
- Control AC outlet and DC booting power switch to be on and off

* Auto-repower AC outlet up
- time set for the auto-repower AC outlet

* Electric safety circuit
- Warning message and switch off automatically over 12A current for AC outlet

* Additional function
- integrated temperature sensor / RS-232 serial interface

* No additional management web server
- cost saving for installation &management

* No additional network device in case of Static IP and intra network

* DHCP : with using the DDNS function of router

RPC-SP8 control web page

:: RPC-SP8 WebUI ::